PA6(尼龙6)BKV130H2.0/德国朗盛/物性表参数

日期：2020-04-25 02:29:55 编辑：科思德塑胶来源：科思德塑胶浏览：359

德国朗盛LANXESS Durethan PA6 BKV130H2.0是一种加30%玻璃纤维，注塑，提高冲击强度，热老化稳定6树脂，尼龙从环境中吸收潮气的能力也不同。这与增塑剂的效果相同，即可以提高材料的断裂伸长及韧性，但降低了材料的強度和剛度,除了自然色及黑色外，还可以提供一系列的不透明标准颜色；如有需要，也可以提供特定颜色的产品。

生产商：LANXESS(德国朗盛)、品名：Durethan
PA6(尼龙6)BKV130H2.0/德国朗盛/物性表参数

These property characteristics are taken from the CAMPUS plastics data bank and are based on the international catalogue of basic data for plastics according to ISO 10350.

Property		Test Condition	Unit	Standard	guide value
					d.a.m.	cond.
Rheological properties
	Molding shrinkage, parallel	60x60x2; 280 °C / MT 80 °C; 600 bar	%	ISO 294-4	0.27
	Molding shrinkage, transverse	60x60x2; 280 °C / MT 80 °C; 600 bar	%	ISO 294-4	0.71
	Post- shrinkage, parallel	60x60x2; 120 °C; 4 h	%	ISO 294-4	0.06
	Post- shrinkage, transverse	60x60x2; 120 °C; 4 h	%	ISO 294-4	0.12
Mechanical properties (23 °C/50 % r. h.)
	Tensile modulus	1 mm/min	MPa	ISO 527-1,-2	9200	5100
	Tensile Stress at break	5 mm/min	MPa	ISO 527-1,-2	150	100
	Tensile Strain at break	5 mm/min	%	ISO 527-1,-2	3.7	8.0
	Tensile creep modulus	1 h	MPa	ISO 899-1		4200
	Tensile creep modulus	1000 h	MPa	ISO 899-1		3300
	Charpy impact strength	23 °C	kJ/m²	ISO 179-1eU	90	90
	Charpy impact strength	-30 °C	kJ/m²	ISO 179-1eU	75	75
	Charpy notched impact strength	23 °C	kJ/m²	ISO 179-1eA	15	25
	Charpy notched impact strength	-30 °C	kJ/m²	ISO 179-1eA	10	10
	Izod impact strength	23 °C	kJ/m²	ISO 180-1U	80	85
	Izod impact strength	-30 °C	kJ/m²	ISO 180-1U	70	70
	Izod notched impact strength	23 °C	kJ/m²	ISO 180-1A	15	25
	Izod notched impact strength	-30 °C	kJ/m²	ISO 180-1A	10	10
	Flexural modulus	2 mm/min	MPa	ISO 178-A	8500	4600
	Flexural strength	2 mm/min	MPa	ISO 178-A	245	145
	Flexural strain at flexural strength	2 mm/min	%	ISO 178-A	4.5	7.0
	Flexural stress at 3.5 % strain	2 mm/min	MPa	ISO 178-A	235	115
	Puncture maximum force	23 °C	N	ISO 6603-2	1002
	Puncture maximum force	-30 °C	N	ISO 6603-2	840
	Puncture energy	23 °C	J	ISO 6603-2	9	17
	Puncture energy	-30 °C	J	ISO 6603-2	6	6
Thermal properties
	Melting temperature	10 °C/min	°C	ISO 11357-1,-3	213
	Temperature of deflection under load	1.80 MPa	°C	ISO 75-1,-2	195
	Temperature of deflection under load	0.45 MPa	°C	ISO 75-1,-2	210
	Vicat softening temperature	50 N; 120 °C/h	°C	ISO 306	> 200
	Coefficient of linear thermal expansion, parallel	23 to 55 °C	10-4/K	ISO 11359-1,-2	0.2
	Coefficient of linear thermal expansion, transverse	23 to 55 °C	10-4/K	ISO 11359-1,-2	0.9
	Burning behavior UL 94	1.5 mm	Class	UL 94	HB
	Burning behavior UL 94	0.75 mm	Class	UL 94	HB
	Oxygen index	Method A	%	ISO 4589-2	22
	Glow wire test (GWFI)	2.0 mm	°C	IEC 60695-2-12	650
	Burning behavior US-FMVSS302			ISO 3795	passed
	Vicat softening temperature	50 N; 50 °C/h	°C	ISO 306	200
Electrical properties (23 °C/50 % r. h.)
	Relative permittivity	100 Hz	-	IEC 60250	4.0	10
	Relative permittivity	1 MHz	-	IEC 60250	4.0	5.0
	Volume resistivity		Ohm·m	IEC 60093	1E13	1E10
	Surface resistivity		Ohm	IEC 60093	1E14	1E12
	Electric strength	1 mm	kV/mm	IEC 60243-1	40	35
Other properties (23 °C)
	Water absorption (Saturation value)	Water at 23 °C	%	ISO 62	7
	Water absorption (Equilibrium value)	23 °C; 50 % RH	%	ISO 62	2.0
	Density		kg/m³	ISO 1183	1360
	Bulk density		kg/m³	ISO 60	600
Processing conditions for test specimens
	Injection molding-Melt temperature		°C	ISO 294	280
	Injection molding-Mold temperature		°C	ISO 294	80
Processing recommendations
	Drying temperature dry air dryer		°C	-	80
	Drying time dry air dryer		h	-	2-6
	Residual moisture content		%	Acc. to Karl Fischer	0.03-0.12
	Melt temperature (Tmin - Tmax)		°C	-	260-290
	Mold temperature		°C	-	80-100

温馨提示：
本物性表参数提供者不承担任何法律责任，建议在选择材料前，就数据值与塑胶材料厂商进行验证。版权归原作者所有，如有侵权请立即与我们联系.

上一页：PA6(尼龙6)BKV130GIT/德国朗盛/物性表参数下一页：PA6(尼龙6)BKV130H3.0/德国朗盛/物性表参数

返回首页返回物性参数列表

PA6(尼龙6)BKV130H2.0/德国朗盛/物性表参数

热门文章

推荐文章